AUTONET TV

No Fueling! (Fuel Filler Location)

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is. 

But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode.

Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufacturers put them on either side?

Some say it should be on the side away from the road.  That way if you run out of gas and have to add a little from a gas can as your standing at the side of the road, you'll be a little farther away from passing traffic.  So some companies from North America and many European firms with left-hand drive put their fillers on the right side.

Some manufacturers think convenience for the driver is paramount, so they put their fuel fillers on the driver's side.  If you have a vehicle with a cable release for the fuel door inside the cabin, it's usually on the same side as the steering wheel.  As you can see, there's no standardization.

Fuel doors need regular maintenance such as lubrication, and your gas cap (if your vehicle has one) should seal properly.  Have your service facility inspect those regularly. Wherever your fuel filler is, it's obviously important that you can get at it easily because you have to fuel up sometime. Otherwise, you're not going to go too far!

Ken's Auto Center
9555 Black Mountain Road
San Diego, CA 92126
8585788200

That Squeal is Telling You Something (What Causes Squealing While Steering)

If you hear a squealing noise when you turn your vehicle, it's trying to tell you something is wrong.  After all, it never made that noise before, right?  The sound  you hear may becoming from a few sources.  Let's take a look (or a listen) to some of the possibilities.

First, you almost certainly have power steering in your vehicle. Without power steering, you practically have to have arms like Arnold Schwarzenegger to turn, so automakers have technology to assist your steering, either mechanically or electrically.  For a long time, the most common power steering has been hydraulic, using a belt to supply power from the engine that turns a power steering pump full of a fluid that helps you steer. 

Sometimes that fluid gets low because of a leak or some other problem.  The belt could wear out and start squeaking, and you might feel the steering start to become harder.  Your service repair facility can figure out the problem and offer some solutions.

Another cause could be in your suspension.  Some components may not be getting lubricated like they should.  Or you may be hearing your tires squealing when you are turning. 

Properly working steering is a huge safety factor for your vehicle's operation.  Your steering affects handling, vital to your well-being as well as that of drivers around you.  So take your vehicle over to your repair facility and have it checked out.  You'll be doing everyone on the road—including yourself—a big favor by listening to your vehicle. When it comes to steering, silence really is golden.  Get that squealing repaired and get back to safe driving.

Ken's Auto Center
9555 Black Mountain Road
San Diego, CA 92126
8585788200

It Wears on You (Tire Rotation)

If someone told you there was a fairly inexpensive way to improve your vehicle's handling, fuel economy and extend the life of your tires, you'd probably ask, "What do I have to do?" The answer is to rotate your tires.  But you have to do it regularly.

A lot of drivers think skipping tire rotation is a way to save money.  But when you don't rotate your tires, they will almost certainly wear unevenly.  That's because when your tires touch the surface of the road, the friction and traction causes miniscule parts of the rubber to come off.  And that process isn't exactly the same on each corner of your vehicle.  Some vehicles have the drive wheels in the front, some in the rear and some on all wheels.

Rotating your tires at regular intervals minimizes the differences in the way the tires wear.  The amount and pattern will be spread out equally if your tires spend time at all different positions.  The more even the wear, the more consistent traction, handling and braking will be.  All four tires will last longer this way, and when it is time to replace your tires, they'll all be worn out the same so you can replace all four with the same model tire.

Some people who choose not to rotate their tires find that one or two will wear much faster than the others, and often they'll replace just the worn ones.  While you can find similar tires, they won't all be the same and will certainly not have the same amount of wear. 

There are different tire rotation patterns depending on several factors: front-wheel drive, rear-wheel drive, all-wheel drive, directional tires/wheels, different sized wheels/tires on front and rear axles.  Also keep in mind that when your tires are new, some tire manufacturers require you to rotate them or else they won't honor the warranty. 

Your manufacturer recommends intervals for tire rotation, so it's best to follow their suggestion.  Your vehicle service facility can advise you when you need to get your tires rotated.  And many facilities include free tire rotation for as long as they're on your vehicle if you buy your tires at their shop.

Ken's Auto Center
9555 Black Mountain Road
San Diego, CA 92126
8585788200

Ken's Auto Center Automotive Tips: Alternator

Your alternator makes electricity to start and run your engine and all of the vital electrical systems in your vehicle. That’s everything from the on-board computers to the turn signals. And of course there is the entertainment system, seat heaters, power windows and everything you plug into the power outlets. After your alternator makes enough electricity to do all that, it recharges your battery with what’s left over.

When San Diego drivers constantly have a low or dead battery, the alternator is usually a prime suspect. However, the alternator is just one vital component of the starting/charging system, and a problem with any of the other components could be the actual cause.

In addition to the alternator, the charging/starting system includes the battery, starter, serpentine belt system and all of the electrical cables that connect them. Your Ken's Auto Center service advisor has a systematic process of testing components and connections to get to the source of your trouble. The initial symptoms determine where to begin the diagnostic process, and he follows the procedure until he tracks down the culprit.

For example, diagnostic tests at Ken's Auto Center could reveal that the alternator is not generating enough electricity to keep the battery charged. Is the alternator bad? Not necessarily. A worn serpentine belt tensioner could be allowing the belt that spins the alternator to slip. So the perfectly good alternator is not spinning at the proper speed. The solution for San Diego drivers is to replace the serpentine belt system – not the alternator.

The good news for San Diego drivers is that our highly-trained technicians at Ken's Auto Center can properly diagnose all your vehicle troubles and make the necessary repairs to get you back on the road in San Diego.

Give us a call.

Ken's Auto Center
9555 Black Mountain Road
San Diego, CA 92126
8585788200